Source: /tmp/arm (PID: 5261) |
File opened: /proc/1582/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2033/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/670/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/793/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1579/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1612/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1699/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/674/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1335/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2028/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/675/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/796/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1334/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1532/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1576/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/797/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/676/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/677/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2025/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/799/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/910/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/912/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/517/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/759/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/918/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1594/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1349/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/761/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/884/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1389/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1983/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2038/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/720/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1344/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1465/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1586/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/721/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1463/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/800/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/801/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/847/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1900/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/491/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1877/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2009/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/772/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1599/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/774/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1477/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/654/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/896/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1476/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1872/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/655/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1475/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/656/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/777/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/657/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/658/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/419/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/936/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1809/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1494/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1890/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1888/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1601/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/420/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1886/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2018/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1489/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/785/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/2014/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1320/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/788/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/667/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/789/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/904/exe |
Jump to behavior |
Source: /tmp/arm (PID: 5261) |
File opened: /proc/1207/exe |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6130/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6152/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6110/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5464/status |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5464/attr/current |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6134/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6112/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5883/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6115/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6137/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5521/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6114/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6092/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6128/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6120/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6121/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6126/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6117/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5566/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5467/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5467/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5468/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6116/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5623/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/6118/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5464) |
File opened: /proc/5869/cmdline |
Jump to behavior |
Source: /usr/bin/dbus-daemon (PID: 5526) |
File opened: /proc/6121/cmdline |
Jump to behavior |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.697] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.902] (II) vmware(0): Not using default mode "960x540" (monitor doesn't support reduced blanking) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.492] (II) vmware(0): Not using default mode "1280x960" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.662] (II) vmware(0): Not using default mode "1920x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.653] (II) vmware(0): Not using default mode "1856x1392" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.327] (II) vmware(0): Not using default mode "1400x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.772] (II) vmware(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.463] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.617] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.911] (II) vmware(0): Not using default mode "480x270" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.353] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.575] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.639] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.892] (--) vmware(0): depth: 24 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.705] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.916] (II) vmware(0): Not using default mode "1024x576" (monitor doesn't support reduced blanking) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.951] (II) vmware(0): Not using default mode "684x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.503] (**) vmware(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.179] (II) vmware(0): Not using default mode "1920x1080" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.767] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.658] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.967] (II) vmware(0): Not using default mode "800x450" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.743] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.570] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.223] (WW) vmware(0): Disabling Render Acceleration. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.251] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.704] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.725] (**) vmware(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.855] (II) vmware(0): Not using default mode "2048x1536" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.736] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.708] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.716] (II) vmware(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.694] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.610] (II) vmware(0): Not using default mode "1600x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.825] (II) vmware(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.695] (II) vmware(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.266] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.435] (II) vmware(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.777] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.050] (II) vmware(0): Not using default mode "2880x1620" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.343] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.575] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.683] (**) vmware(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.465] (**) vmware(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.926] (--) vmware(0): pbase: 0xe8000000 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.044] (II) vmware(0): Not using default mode "1280x720" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.754] (II) vmware(0): Not using default mode "1400x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.941] (II) vmware(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.608] (**) VirtualPS/2 VMware VMMouse: always reports core events |
Source: arm, 5255.1.0000000039dd1254.00000000e616feff.rw-.sdmp |
Binary or memory string: U!/etc/qemu-binfmt/arm |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.749] (**) vmware(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.236] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.203] (II) vmware(0): Not using default mode "4096x2304" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.394] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.523] (**) vmware(0): Default mode "640x360": 18.0 MHz, 22.5 kHz, 59.8 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.480] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.747] (II) vmware(0): Not using default mode "1400x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.959] (II) vmware(0): Not using default mode "684x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.548] (==) vmware(0): DPI set to (96, 96) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.317] (II) vmware(0): Not using default mode "1400x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.669] (II) event2 - VirtualPS/2 VMware VMMouse: device removed |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.822] (II) vmware(0): Not using default mode "1920x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.221] (II) vmware(0): Not using default mode "2560x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.332] (II) vmware(0): Not using default mode "700x450" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.519] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.780] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.794] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 491.489] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event3) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.513] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.859] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.869] (II) vmware(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.068] (II) vmware(0): Not using default mode "1440x810" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.539] (**) vmware(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 485.139] (==) vmware(0): Silken mouse enabled |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.382] (**) vmware(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.963] (II) vmware(0): Not using default mode "1600x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.301] (II) vmware(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) |
Source: arm, 5255.1.000000004a06d35e.00000000a75fc404.rw-.sdmp |
Binary or memory string: /usr/bin/qemu-arm |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.832] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.717] (II) vmware(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.514] (**) vmware(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.710] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration threshold: 4 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.874] (II) vmware(0): Not using default mode "720x405" (monitor doesn't support reduced blanking) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.477] (II) vmware(0): Not using default mode "1280x800" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.469] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.511] (II) vmware(0): Not using default mode "1280x960" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.610] (**) vmware(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.898] (II) vmware(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.217] (WW) vmware(0): Disabling 3D support. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.389] (II) vmware(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.349] (**) vmware(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.262] (II) vmware(0): Not using default mode "3840x2160" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.579] (**) vmware(0): Default mode "1152x864": 119.7 MHz, 77.1 kHz, 85.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 480.677] (==) Matched vmware as autoconfigured driver 0 |
Source: arm, 5255.1.000000004a06d35e.00000000a75fc404.rw-.sdmp |
Binary or memory string: x86_64/usr/bin/qemu-arm/tmp/armSUDO_USER=saturninoPATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/binDISPLAY=:1.0XAUTHORITY=/run/user/1000/gdm/XauthoritySUDO_UID=1000TERM=xterm-256colorCOLORTERM=truecolorLOGNAME=rootUSER=rootLANG=en_US.UTF-8SUDO_COMMAND=/bin/bashHOME=/rootMAIL=/var/mail/rootSUDO_GID=1000SHELL=/bin/bash/tmp/arm |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.527] (II) vmware(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.864] (II) vmware(0): Not using default mode "320x180" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.345] (II) vmware(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.990] (II) vmware(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.062] (II) vmware(0): Not using default mode "2880x1620" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.894] (II) vmware(0): Not using default mode "432x243" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.173] (II) vmware(0): Not using default mode "3840x2160" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.995] (--) vmware(0): w.red: 8 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 480.906] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.361] (II) vmware(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.000] (II) vmware(0): Not using default mode "2048x1152" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.974] (II) vmware(0): Not using default mode "800x450" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.017] (II) vmware(0): Not using default mode "2048x1152" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.787] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.818] (II) vmware(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.956] (--) vmware(0): depth: 24 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 485.146] (II) vmware(0): Initialized VMware Xv extension successfully. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.815] (II) vmware(0): Not using default mode "1920x1080" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.428] (II) vmware(0): Not using default mode "1920x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.470] (II) vmware(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.724] (II) vmware(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.886] (**) vmware(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.375] (II) vmware(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.056] (II) vmware(0): Not using default mode "1440x810" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.441] (**) vmware(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.197] (II) vmware(0): Not using default mode "2048x1152" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.720] (II) vmware(0): Not using default mode "1360x768" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.709] (**) vmware(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.689] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.671] (II) vmware(0): Not using default mode "1920x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.209] (II) vmware(0): Not using default mode "2048x1152" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.228] (II) vmware(0): Not using default mode "5120x2880" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.633] (II) vmware(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.829] (II) vmware(0): Not using default mode "1920x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.454] (**) vmware(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.846] (II) vmware(0): Not using default mode "2048x1536" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.701] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.553] (II) vmware(0): Modeline "1152x864"x85.1 121.50 1152 1216 1344 1568 864 865 868 911 +hsync -vsync (77.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.564] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/event2) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.250] (II) vmware(0): Not using default mode "3840x2160" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.982] (II) vmware(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.580] (II) vmware(0): Not using default mode "1600x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.288] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.429] (**) vmware(0): Default mode "864x486": 32.5 MHz, 30.3 kHz, 59.9 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.792] (II) vmware(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.623] (II) vmware(0): Not using default mode "1792x1344" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.307] (II) vmware(0): Not using default mode "1280x800" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.613] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.775] (**) vmware(0): Default mode "1024x576": 46.5 MHz, 35.9 kHz, 59.9 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.683] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 9) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.366] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.129] (==) vmware(0): RGB weight 888 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.840] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.883] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 480.770] (II) Module vmware: vendor="X.Org Foundation" |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.376] (II) vmware(0): Not using default mode "1920x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.937] (II) vmware(0): Not using default mode "1280x720" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.030] (II) vmware(0): Creating default Display subsection in Screen section |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.509] (II) vmware(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.991] (II) vmware(0): Not using default mode "1920x1080" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.100] (II) vmware(0): Not using default mode "1600x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.279] (II) vmware(0): Not using default mode "15360x8640" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.259] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.494] (II) vmware(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.805] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.486] (**) vmware(0): Default mode "720x405": 22.5 MHz, 25.1 kHz, 59.5 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.215] (II) vmware(0): Not using default mode "5120x2880" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.535] (II) vmware(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.676] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 480.711] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.081] (II) vmware(0): Not using default mode "3200x1800" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.602] (II) vmware(0): Not using default mode "1600x1200" (insufficient memory for mode) |
Source: arm, 5261.1.00000000e616feff.000000000c04f09f.rw-.sdmp |
Binary or memory string: /usr/bin/vmtoolsd |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.740] (II) vmware(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.758] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.590] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.234] (II) vmware(0): Not using default mode "2560x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.136] (==) vmware(0): Default visual is TrueColor |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.468] (II) vmware(0): Not using default mode "2560x1600" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 485.130] (==) vmware(0): Backing store enabled |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.450] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.649] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.734] (II) vmware(0): Not using default mode "1400x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.312] (II) vmware(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.680] (II) vmware(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.625] (**) vmware(0): Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.513] (II) vmware(0): Modeline "vmwlegacy-default-800x600"x60.0 36.25 800 801 802 1002 600 601 602 603 (36.2 kHz ez) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.498] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.594] (II) vmware(0): Not using default mode "1600x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.946] (--) vmware(0): mheig: 885 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.152] (II) vmware(0): Not using default mode "1600x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.475] (**) vmware(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.751] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.712] (II) vmware(0): Not using default mode "1360x768" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.243] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 491.504] (II) Using input driver 'libinput' for 'VirtualPS/2 VMware VMMouse' |
Source: arm, 5261.1.00000000e616feff.000000000c04f09f.rw-.sdmp |
Binary or memory string: !/proc/1594/exe0!/usr/bin/vmtoolsd1P |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.093] (--) vmware(0): vis: 4 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.539] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.836] (II) vmware(0): Not using default mode "2048x1536" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.384] (II) vmware(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.028] (II) vmware(0): Not using default mode "2560x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.598] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.661] (II) event2 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.536] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse1) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.741] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.108] (==) vmware(0): Depth 24, (==) framebuffer bpp 32 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.905] (II) vmware(0): Not using default mode "480x270" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.563] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.274] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.978] (II) vmware(0): Not using default mode "1920x1080" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.422] (II) vmware(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.975] (--) vmware(0): bpp: 32 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.339] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.731] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.902] (II) vmware(0): Initialized VMware Xinerama extension. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.644] (II) vmware(0): Not using default mode "1856x1392" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.907] (II) vmware(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.268] (II) vmware(0): Not using default mode "15360x8640" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.214] (II) vmware(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.458] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.878] (II) vmware(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.322] (II) vmware(0): Not using default mode "700x450" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.910] (--) vmware(0): bpp: 32 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.549] (II) vmware(0): Not using default mode "1280x1024" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.657] (II) vmware(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.769] (II) vmware(0): Not using default mode "1600x1024" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.231] (WW) vmware(0): Disabling RandR12+ support. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.727] (II) vmware(0): Not using default mode "1400x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.185] (II) vmware(0): Not using default mode "4096x2304" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.211] (EE) vmware(0): Failed to open drm. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.185] (II) vmware(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.757] (II) config/udev: Adding input device VirtualPS/2 VMware VMMouse (/dev/input/mouse0) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.438] (II) vmware(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.882] (II) vmware(0): Not using default mode "360x202" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.159] (==) vmware(0): Will set up a driver mode with dimensions 800x600. |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 480.700] (II) LoadModule: "vmware" |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.039] (II) vmware(0): Not using default mode "2560x1440" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.700] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.761] (II) vmware(0): Not using default mode "1440x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.006] (II) vmware(0): Not using default mode "1024x576" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.459] (II) vmware(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.537] (**) vmware(0): Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.036] (--) vmware(0): w.grn: 8 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.765] (II) vmware(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.461] (**) VirtualPS/2 VMware VMMouse: (accel) selected scheme none/0 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.627] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.890] (II) vmware(0): Not using default mode "864x486" (monitor doesn't support reduced blanking) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.034] (II) vmware(0): Not using default mode "1280x720" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.401] (II) event3 - VirtualPS/2 VMware VMMouse: device removed |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.791] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.675] (II) vmware(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.568] (II) vmware(0): Not using default mode "1280x1024" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.166] (==) vmware(0): Using gamma correction (1.0, 1.0, 1.0) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.476] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.273] (II) vmware(0): Not using default mode "7680x4320" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.224] (II) vmware(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.933] (II) vmware(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.925] (II) vmware(0): Not using default mode "512x288" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.460] (II) vmware(0): Not using default mode "1280x800" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.403] (**) vmware(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.971] (II) vmware(0): Not using default mode "1600x900" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.597] (II) vmware(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync (77.1 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.996] (II) vmware(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.256] (II) vmware(0): Not using default mode "7680x4320" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.223] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.631] (II) vmware(0): Not using default mode "1792x1344" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.850] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.641] (**) vmware(0): Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.933] (--) vmware(0): mwidt: 1176 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.521] (**) vmware(0): Default mode "1152x864": 143.5 MHz, 91.5 kHz, 100.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.092] (**) vmware(0): Default mode "960x540": 40.8 MHz, 33.5 kHz, 59.6 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.808] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.416] (**) vmware(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.617] (II) vmware(0): Not using default mode "1600x1200" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.531] (**) vmware(0): Default mode "640x360": 17.8 MHz, 22.2 kHz, 59.3 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.798] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.144] (==) vmware(0): Using HW cursor |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.284] (II) vmware(0): Not using default mode "7680x4320" (insufficient memory for mode) |
Source: arm, 5255.1.0000000039dd1254.00000000e616feff.rw-.sdmp |
Binary or memory string: /etc/qemu-binfmt/arm |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.410] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.337] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.197] (II) vmware(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.174] (II) vmware(0): Clock range: 0.00 to 400000.00 MHz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.126] (II) vmware(0): Not using default mode "3200x1800" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.379] (II) event3 - VirtualPS/2 VMware VMMouse: is tagged by udev as: Mouse |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.312] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.504] (**) vmware(0): *Driver mode "vmwlegacy-default-800x600": 36.3 MHz, 36.2 kHz, 60.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.518] (II) vmware(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.801] (II) vmware(0): Not using default mode "1680x1050" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.543] (II) vmware(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.534] (II) vmware(0): Not using default mode "1280x1024" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.160] (II) vmware(0): Not using default mode "3840x2160" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.448] (II) vmware(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 491.496] (**) VirtualPS/2 VMware VMMouse: Applying InputClass "libinput pointer catchall" |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.665] (II) event2 - VirtualPS/2 VMware VMMouse: device is a pointer |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.167] (II) vmware(0): Not using default mode "1920x1080" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.076] (--) vmware(0): w.blu: 8 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.929] (II) vmware(0): Not using default mode "1280x720" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.481] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.023] (II) vmware(0): Not using default mode "1024x576" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.486] (II) vmware(0): Virtual size is 800x600 (pitch 1176) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.955] (II) vmware(0): Not using default mode "1368x768" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.466] (**) VirtualPS/2 VMware VMMouse: (accel) acceleration factor: 2.000 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.620] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.244] (II) vmware(0): Not using default mode "7680x4320" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.812] (II) vmware(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.918] (--) vmware(0): vram: 4194304 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.441] (II) XINPUT: Adding extended input device "VirtualPS/2 VMware VMMouse" (type: MOUSE, id 8) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.529] (II) vmware(0): Modeline "1152x864"x100.0 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync (91.5 kHz d) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 491.582] (**) VirtualPS/2 VMware VMMouse: always reports core events |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.665] (**) vmware(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.295] (II) vmware(0): Not using default mode "1280x800" (width requires unsupported line pitch) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 484.368] (**) vmware(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.667] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.921] (II) vmware(0): Not using default mode "512x288" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.947] (II) vmware(0): Not using default mode "1368x768" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 481.880] (--) vmware(0): caps: 0xFDFF83E2 |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 483.452] (II) vmware(0): Not using default mode "2560x1600" (insufficient memory for mode) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.441] (II) vmware(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 482.606] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) |
Source: Xorg.0.log.104.dr |
Binary or memory string: [ 492.519] (II) event3 - VirtualPS/2 VMware VMMouse: device is a pointer |